 |
| 1) Can Seaguar fluorocarbon line be used on spinning and bait casting reels? |
| Yes, all Seaguar lines are soft enough to be used on any reel for any type of fishing.
Back to Top |
 |
| 2) Are all 100% fluorocarbon products the same? |
| No. Just because the product says 100% fluorocarbon does not mean it is just like any other on the market. Only Seaguar makes fluorocarbon lines and leaders from beginning to end without any outside companies involved. The difference of quality varies from brand to brand.
Back to Top |
|
| 3) Why is fluorocarbon more expensive than nylon? |
| Nylon is a less expensive material and easier to extrude (produce).
Back to Top |
|
| 4) Why is Seaguar sometimes more expensive than other fluorocarbons? |
| There are a few fluorocarbons that are more expensive. Seaguar costs a little bit more because the resins and extrusion process are all of the highest quality and the latest technology and are manufactured ONLY for lines and leaders. We cannot speak for the competition.
Back to Top |
|
| 5) What are the differences between Seaguar fluorocarbon Leaders and Seaguar fluorocarbon Lines? |
Strength – While both are strong and will withstand the lb test listed, leader and tippet are stronger over shorter lengths and are not designed to be a long, main line product. The main lines are designed to take the impact load over a much longer distance, transferred throughout the line.
Double Structure Technology – Our FC, FP, GM, and FX are all Double Structure, (2 to 80 lb), a Seaguar exclusive process that injects two different molten resins through a special die. The resins are extruded as one solid piece. The harder, inside resin contributes to the Tensile Strength, while the softer, outside resin creates greater Knot Strength. Our current main lines are single structure.
Price – Leaders and Tippets are more difficult to produce because of double structure and the resins involved, therefore line is less expensive and leader/tippets cost more.
Resins – Since Seaguar is the only fluorocarbon brand in the world that makes its own resins, different exclusive resins are used for all of our products. The resins in our line are different than the resins in our leaders.
Back to Top |
|
| 6) Who invented fluorocarbon line and leader? |
| Kureha, our parent company headquartered in Tokyo, Japan, invented Seaguar, the first fluorocarbon leader and line in the world.
Back to Top |
|
| 7) When was fluorocarbon line first invented? |
| Seaguar was first introduced to the world in 1971.
Back to Top |
|
| 8) When was fluorocarbon first sold in the US? |
| Seaguar was first introduced, by an authorized distributor, to the US in 1992.
Back to Top |
|
| 9) Which fluorocarbon brand makes their own resins? |
| Seaguar is the only company that makes their own resins for each line and leader.
Back to Top |
|
| 10) Which fluorocarbon companies make their products from beginning to end? |
| Only Seaguar controls the products in their own facilities, nothing is left to chance.
Back to Top |
|
| 11) What does double structure mean? |
Double Structure is the combining of two distinct 100% fluorocarbon resins into one solid piece. The exterior resin is soft and contributes to higher knot strength, while the interior resin is hard and contributes to higher tensile strength. A Seaguar Exclusive.
Back to Top
|
|
| 12) Can the double structure line separate? |
| No, being that it is a solid piece and not layered or coated, it cannot separate.
Back to Top |
|
| 13) What fluorocarbon companies have Double Structure Extrusion Process? |
| Seaguar is the only company in the world that produces double structure fluorocarbon.
Back to Top |
|
| 14) Which company has the largest selection of lines and leaders? |
| Seaguar has the largest selection of all fluorocarbon brands.
Back to Top |
|
| 15) What is fluorocarbon made from? |
| Fluorocarbon is made from Hydrogen, Carbon, and Fluoride. This combination of elements creates the molecule known as PVDF, or Poly-Vinyl-i-Dene-Fluoride.
Back to Top |
|
| 16) Aren’t all fluorocarbon lines stiff? |
| No, Seaguar produces incredibly soft and cast-able lines.
Back to Top |
|
| 17) Isn’t knot strength a problem with fluorocarbon? |
| Originally, knot strength was the weakest part of fluorocarbon. With our technology, Seaguar’s knot strength is not a factor.
Back to Top |
|
| 18) I notice that some fluorocarbons are clearer than others. Does this mean it has gone bad? |
| No. Due to the resins and the extrusion process involved, the line or leader may have a slight tint. The product is perfectly fine and can be used.
Back to Top |
|
| 19) I notice that some fluorocarbons are clearer than others. Does this affect the invisibility? |
| No. The invisibility of 100% fluorocarbon remains a constant, despite the clarity.
Back to Top |
|
| 20) I have heard that if you nick fluorocarbon line it will shine brightly. Is this true? |
| No. As long as it is 100% fluorocarbon, the refractive index will remain the same and not light up or shine when nicked or scratched.
Back to Top |
|
| 21) Does coating nylon with fluorocarbon make it almost invisible? |
| It can help some, but clear coating a red car, still shows the red underneath.
Back to Top |
|
| 22) Can 100% fluorocarbon be made more invisible? |
| No. The refractive index of 100% fluorocarbon is a constant and cannot be altered.
Back to Top |
|
| 23) Is it possible to make fluorocarbon more UV resistant than others? |
| Not really, as 100% fluorocarbon is almost totally impervious to UV rays. If it could, it would not be a factor that makes much of a difference.
Back to Top |
|
| 24) Does Seaguar make resins for other manufacturers of fluorocarbon lines and leaders? |
| No. Seaguar does not sell their line and leader resins to other manufacturers.
Back to Top |
|
| 25) Will hot weather or excessive heat (left in a closed vehicle on a hot day) hurt fluorocarbon? |
| While we do not recommend leaving anything of value in a closed vehicle on a hot day, it should have no effect on the fluorocarbon.
Back to Top |
|
| 26) Will cold weather have an effect on fluorocarbon? |
| Fluorocarbon is perfect for cold water or ice fishing as it absorbs very little water, remaining soft and supple.
Back to Top |
|
| 27) Do I need to store my fluorocarbon leader or line in a dark place? |
| No. Fluorocarbon is not affected by fluorescent lighting or other forms of UV rays.
Back to Top |
|
| 28) Is 100% fluorocarbon completely invisible under water? |
| No. It is as close as any form of line or leader can get to the refractive index of water, thus making it virtually invisible, but not completely. Some brands do state that, but it is not true.
Back to Top |
|
| 29) What is refractive index? |
| Refractive Index, in this case, is a numerical value assigned to how light is bent when something extends from air to water. It can be demonstrated by placing a pencil in a clear glass of water. It looks like the pencil bends under the water. Air to Water has a refractive index of 1.33. Air to Fluorocarbon has a refractive index of 1.42. Air to Nylon has a refractive index of 1.62. This means that fluorocarbon refracts light closer to water, thus making it more difficult to see when under water.
Back to Top |
|
| 30) Is it possible to make 100% fluorocarbon less visible than other 100% fluorocarbons? |
| No, it is not possible, although there are fluorocarbon brands out there that would have you believe different. The refractivity of 100% fluorocarbon is a constant, and cannot be altered.
Back to Top |
|
| 31) What is the life span of fluorocarbon? |
| Fluorocarbon is usable over a much longer period of time than nylon monofilaments. Although you should re-spool as necessary, with fluorocarbon you can re-spool less.
Back to Top |
|
| 32) What does altering the molecular structure mean? I have heard that claim before. |
| Molecularly altering the line is a necessary process for all extrusion of fluorocarbon resins. It is simply selling the “sizzle” and not the steak. If you heat it, cool it, or take it beyond its normal extreme, it alters the molecular structure.
Back to Top |
|
| 33) Can other companies use more than one fluorocarbon resin to produce their line? |
| Yes, the mixing of two resins can be done by other companies, but the resins are simply mixed, and not extruded in any special proprietary form like Seaguar DST (Double Structure Technology).
Back to Top |
|
| 34) Is it true that nylon monofilament can absorb water and become 30% weaker over time? |
| Absolutely. Seaguar absorbs much less water and remains strong, regardless of water type.
Back to Top |
|
| 35) Do I have to wash the fluorocarbon or treat it with something before I spool it onto my reel? |
| No treatments are necessary. Seaguar is ready to use right off the spool.
Back to Top |
|
| 36) Do I need to rinse off fluorocarbon after using it? |
| Although various water types will have no effect on fluorocarbon, you should always rinse off your gear, especially when fishing in salt or brackish water.
Back to Top |
|
| 37) What is Level Wind Technology and why does it make a difference? |
| Only Seaguar has Level Wind Technology in the fluorocarbon market. Level Wind Technology helps: Maintain Strength, Keep line Smoother, and Increase Cast-ability.
Back to Top |
|
| 38) Can Seaguar line and leader be used in both fresh and salt water? |
| Yes, the type of water, including brackish, will have no effect on Seaguar.
Back to Top |
|
| 39) Will bug sprays or sun blocks hurt fluorocarbon? |
| You should always wash your hands after handling any product that might affect the performance of your fishing, however, these and many other products, will have no effect on fluorocarbon. Please note, they will ruin nylon monofilament lines and leaders.
Back to Top |
|
| 40) I have heard a lot about colored fluorocarbons like pink and green. Does coloring the line make it better? |
| No. Actually adding color to 100% fluorocarbon makes it weaker, as the dye pigments mix with the fluorocarbon resins. It remains visible until sunlight is completely removed.
Back to Top |
|
| 41) Why was pink chosen for a color of fluorocarbon? |
| Originally the color red began showing up on lures, then on hooks. It is believed that the red mimics a wounded baitfish. Red line then became popular, following the whole red theme. The claim is that since red is the first color in the spectrum that loses its color as sunlight is withdrawn, it will become more invisible the deeper it goes. The color red actually appears gray, as it is not reflecting the red rays from the sun. The simple test is: put the red line in the water and see if it becomes harder to see.
Back to Top |
|
| 42) Why would I want to use fluorocarbon instead of nylon monofilament? |
| Fluorocarbon is the next generation in fishing line. It provides: sensitivity, shock impact strength, near invisibility, abrasion resistance, chemical resistance, UV resistance, and long life span. When fishing side by side with nylon mono or other lines, fluorocarbon consistently catches more fish. Just ask the pros.
Back to Top |
|
| 43) Does fluorocarbon stretch? |
| Yes, fluorocarbon lines and leaders do stretch, but not as much as mono. Line typically has more stretch than leader. All Seaguar lines and leaders provide the optimum amount of shock impact/stretch.
Back to Top |
|
| 44) I have seen ‘Made in USA’ on a package of fluorocarbon, can this be true? |
| No fluorocarbon product is entirely manufactured in the USA.
Back to Top |
|
